How to refill hp-818 cartridge, Normal refill of cardtridge doesn't work as printer doesn't recognises it.?

I tried to get the cartridge refill by conventional method of injecting the ink, but printer still shows cartridge as empty. New cartridges are really costly and gives very less prints. I am not finding why other hp print cartridges can be refilled but not this one.How to refill hp-818 cartridge, Normal refill of cardtridge doesn't work as printer doesn't recognises it.?
Your printer will not show ink levels with refills or even compatibles, but it should still print mine does. Even if you refilled the cartridges in the most proffessional way they still will continue to register empty as the cartridge has information in the chip that tells it the cartridge is empty. It's a bit like buying a cinema ticket. You use it once but after that you can't go back to see the same film without the ticket, so you have to sneak back in through the window. Although you can re watch the film you loss some advantages like being able to go to buy some snacks in the interval and being allowed back in. Your printer says you watched the film so you have to sneak back in and loss the right to go for snacks which in this case is ink level readings.How to refill hp-818 cartridge, Normal refill of cardtridge doesn't work as printer doesn't recognises it.?
It can be. I am a ink/toner tech for Cartridge World. Check out http://www.cartridgeworld.com/ for a location near you. They are train techs that know what they are doing. Your levels on a refilled cartridge will not read full they will read the same as they did when they were empty. Simply press ok when the printer tells you that you are out of ink and it will continue to print.
The Cartridge still shows empty because they have a chip installed in them. i will try to find out how you go about fooling it, it can be done, back as soon as i find out how.








Remove both black and color cartridges from your printer. Turn the printer on and off 5 times. In between the on and off allow twenty seconds for the machine to power down completely. When turning the printer on allow it to go through normal start up so that it realizes there are no cartridges. Some HP printers retain the ID of the last 5 cartridges used (black and color).





When the printer cartridges are not present it removes the ID from the current list. After 5 times it has removed all of the IDs and therefore believes the cartridges are now new.














The newer HP cartridges still need the tape trick. That is, selectively putting square pieces of tape on specific places on the foil contacts. For some reason this does not work every time. If this happens you need to repeat the procedure from step one. Many people give up if the first try is unsuccessful. Keep at it because it will eventually reset. I don't know why some of them are buggers. Some cartridges seem to have a mind of their own.
Don't refill the toner its Spoil the printer.You can change the cartridge